1
Advertising
West 6010 Manual Instructions
Making a manual ZERO adjustment not only affects the lowest range but also the higher ranges, though to a lesser extent. For example, assume an automatic ZERO has already been performed, after which all ranges should read zero. Now a manual adjustment is made that causes the reading on the lowest range to be non-zero. The reading on the other.
/
4
6010 Manual Us Navy
-DIN,
/
8
-DIN &
/
16
- DIN Controllers & Indicators - Product Manual
59305, Issue 7
– March 2014
Powering Up
Page 37
6 Messages and Error Indications
The following displays are shown when an error occurs or a hardware change is detected.
Table 4. Error/Faults conditions
Error/Faults Conditions
Upper display
Lower Display
(where fitted)
1
/
8
DIN Indicator
Units Display
Configuration & Setup is required.
Seen at first turn on or if hardware configuration changed.
Press to enter Configuration
Mode, next press or to enter the unlock code number, then press to proceed.
Configuration must be completed
before return to operator mode is allowed
1
( for 1
second, then
on
Indicators)
Tv serial songs download.
Input more than 5% over-range
2
*
Normal Display
Normal Display
Input more than 5% under-range
3
*
Normal Display
Normal Display
Sensor Break. Break detected in
the input sensor or wiring
*
Normal Display
Normal Display
Auxiliary input over-range
Normal Display
*
n/a
Auxiliary input under-range
![]()
Normal Display
*
n/a
Auxiliary Break. Break detected in
the auxiliary input
Normal Display
*
n/a
Option 1 module fault.
**
Option 2 module fault.
**
Option 3 module fault.
**
![]()
Option A module fault.
**
Option B module fault.
Slideshow app for windows 10. * Note
Input sensor and Auxiliary over/under-range or break indications will be seen wherever
these values would normally be displayed.
** Note
Option module number follows error legend on
1
/
16
DIN Indicators (e.g. )
1
This feature does not guarantee correct configuration. It only helps to ensure that the unit will be configured
before use. Use of set-up mode is not enforced but may be essential for the users application.
2
If the PV display exceeds
before 5% over-range is reached, an over-range indication is given.
3
Indicators will allow up to 10% under-range on non-zero based Linear ranges. If the PV display is less than
before the % under-range is reached, an under-range indication is given.
Advertising
This manual is related to the following products:
6700+, 4700+, 8010+, 6010+, 8170+, 8100+, 6170+, 6100+, 4170+, 4100+
Popular Brands
Popular manuals
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |